Handcrafted Since 2011 · Worldwide Delivery

Fan Hardware Guide

Fan Hardware Guide

How to Keep Your Feather Fans Fully Open

Watch this quick tutorial for the locking-bolt setup. Use the steps beside the video—including optional washer adjustments—to fine-tune resistance without stressing the staves.

01

Use the Locking Bolt

Use the included threaded locking bolt and nut—not the smooth pivot bolt—when you want the fan to stay open more firmly. Make sure the locking bolt is installed in the correct position. Friction from tightening alone is not the same as a true mechanical lock.

02

Adjust Washers Only If Needed

The translucent rings between the staves are plastic washers. They reduce friction and help protect the staves, so you do not need to remove them automatically. If the fan still moves too freely after the locking bolt is fitted, you can try removing the plastic washers between the staves. Keep a suitable metal washer at the outer bolt and nut positions—metal washers are not needed between every stave.

03

Tighten Gradually, Then Test

Tighten the nut a little at a time until the fan has enough resistance to remain open. Do not overtighten, as this may damage the staves. Loosen the locking nut when you want the fan to open and close freely again. Handle carefully after adjustment.

Common Questions

Why are there translucent plastic washers between the staves?
Those translucent rings are plastic washers. They reduce friction between the staves and help protect their surfaces—including coated aluminum staves—during opening and closing. They do not automatically need to be removed or replaced with metal washers.
Should I remove the plastic washers or replace them with metal ones?
Not automatically. First check that the threaded locking bolt is installed correctly. If the fan still moves too freely, you can try removing the plastic washers between the staves to add resistance. This is optional—not a permanent requirement. Keep suitable metal washers where needed at the outer bolt and nut positions. There is no need to place metal washers between every stave.
What if my fan still will not stay open?
Avoid forcing the fan or overtightening the nut. Recheck the locking-bolt position and washer arrangement, then test gently again. Every pair of HOT-FANS feather fans includes a complimentary locking bolt and nut set. If it still will not stay open, contact HOT-FANS Customer Support with a short video of your bolt and washer setup—we will guide you through the next adjustment.